Request a Quote
        Specs, Quotes, Overview
        Standard Features
        Print a Brochure
        Return To List
        Isuzu Accessories
 Standard Features:
Cab Front
  New modern cab - Designed with added rigidity for safety. Side sills and front under frame close-section construction with tension-resistant steel. Front pillar is unitary construction from cowl to rocker with larger gusset for more rigidity with cowl. Cab designed with nonlinear analysis to make deformation forecast to enable improved cab design and to protect the driver and passenger. Galvanized steel panels for greater rust and corrosion protection  
  Roof water channels - Direct water away from the center of the windshield  
  Cab marker / ID lamps - Shock mounted for extended bulb life  
  Bonded windshield - Superior visibility, no water leaks, no wind noise, increase cab rigidity for added cab strength  
  Upper tinted front windshield - Provides for improved visibility and safety  
  Wet arm wipers - Directs the washer fluid just ahead of the wiper blades for better cleaning  
  Removable front panel - Access to wiper motor, wiper linkage, electrical cab connections and air intake filters. Also less costly replacement cost  
  Chrome front grille - New modern design and quality industry trend  
  Flush surface head lamps - Halogen bulbs for longer life, brighter light  
  Daytime running lights - Better vehicle awareness  
  Paint process - Electro deposit primer (E-Coat) for corrosion protection  
  Steel reinforced composite front bumper - Reinforced for greater cab protection and improved styling  
Passenger Side to Rear Axle
  Side windows - Large low cut for better side visibility  
  Side view mirrors - Break away function to protect cab doors, large 17 x 8 in. West-coast with 11 x 7 in. flat glass & 4 x 6 in. integrated convex for better visibility and safety  
  Door handles - Large resin grip pull type handles for better paint protection and ease of operation, can be opened using work gloves  
  Front axle - 6,830 lbs. capacity Reverse Elliott I Beam maintains wheel alignment for less tire wear, can handle large front axle loads  
  Side-mounted turn signal - Can be seen from the side for better vehicle awareness  
  Cornering lamps - Better side visibility during turning in low light conditions  
  Front suspension - Taper leaf front springs for better ride, greater durability, lighter weight, along with power steering, shock absorbers and front stabilizer bar provides better driving control  
  Tires / Wheels - All season tires for better traction, tires can be rotated. Heavy duty steel wheel with right and left hand lug nuts to maintain the torque to hold the wheels to the hubs for safer operation  
  Variable power steering 18.8-20.9:1 - Easier operation in and out of tight parking spots added with a 42.5 degree inside wheel cut provides for greater maneuverability  
  Engine coolant tank - Located for visual level checks reduced pre trip inspection time  
  Air cleaner and filter minder - Large single stage for extended filter life and better engine protection. Locking Filter Minder restriction indicator to let operator know when the filter needs changing for less down time. New cab mounted air intake with resonator to reduce air intake noise for quieter cab interior  
  New improved cab mounting - Provides better ride  
  Exhaust system - Stainless steel with particulate filter, muffler and exhaust gas cooler to meet 2007 emissions and cools down the exhaust gases during operation and regeneration  
  Engine exhaust brake - Assist with vehicle braking to prolong brake lining life  
  Frame - 44,000 psi frame for greater strength, wheelbases to accommodate bodies up to 20 ft. and clean frame for body mounting, new 80 / 40mm modular hole spacing to added with equipment and body mounting  
  Right side mounted fuel tank  
  Rear axle - 14,550 lbs. capacity heavy duty banjo type for greater durability and load carrying capacity  
  Rear suspension - Two stage multi-leaf suspension for better ride and load carrying  
Rear of Truck
  In-rail fuel tank - 30 gallon for extended operating range, through the frame fuel fill for easier filling and lower body floor height. Fuel filler hose is longer to accommodate 102 in. bodies  
  Body mounting connector - Weather pack for improved body mounting, less electrical problems  
  Backup alarm connectors - Less electrical problems from body builder splicing into electrical system  
  Frame width - 33.5 in. frame width for standard body mounting allows for all type of body installations  
Driver Side of Truck
  Brakes - Large front disc brakes with large self adjusting drum rear brakes for better stopping power, out board mounted rear brake drums for reduced maintenance cost  
  Remote PTO connectors Used by body companies for remote PTO and engine idle up applications  
  Batteries and electrical - Large 750 CCA maintenance free batteries for better starting and electrical storage  
  Lockable battery hold downs - Theft protection against battery loss  
  Aisin Remote mounted Transmission oil filter - Easily accessible for changing filters, reduces the frequency of oil pan removal, less cost and fewer leaks, finer micron filter than a traditional screen  
  Remote hand fuel primer - Easy access and operation for reduce maintenance cost  
  Weather pack body connector - Located LH rail and EOF weather sealed body connector for easier body mounting and reduced maintenance cost  
  Rear cab engine cover - Reduces noise and improve rear cab appearance  
Under Cab
  Torsion assist 45° cab tilt - Better engine access for reduced maintenance cost and easy cab tilt  
  Fuel water separator - Has dash mounted warning light to warn driver when water is present in the fuel to help reduce engine shutdowns. Warms the fuel in extreme cold areas to prevent fuel from jelling, causing engine to shutdown  
  Undercoating wheel wells - Protection from rock chipping to increase corrosion resistance  
  Splash shields - Protect engine compartment from road spray and reduce maintenance cost  
  Engine compartment insulation - Prevents engine noise and heat entering the driver compartment  
  5.2L 4HK1-TC Diesel Engine – 90% of engines should reach 310,000 miles before major failure provided good maintenance practices  
  Dual water cooled EGR - Lower intake temperatures reduce Nox emissions  
  110A alternator – 145A on gas vehicles to meet all type of vocational electrical requirements  
  Increased oil / filter change interval - Reduced maintenance and operating cost  
  Aisin A465 6 speed double over drive A / T - Allows for all skill levels of operators; with double overdrive adds to improve fuel economy and smoother shifting  
  Manual 6-speed overdrive M / T - Lets the more proficient drivers have more control over the vehicle. It also allows for less weigh on the vehicle  
  Increased radiator size and bell mouth cooling - Maintains the correct relationship with the fan and radiator during engine operation for maximum cooling  
  New larger air conditioning condenser - Relocated vertical and raised for greater protection reducing operating cost and provides improved cab cooling  
  6,000 lbs. towing - Provides for higher GCWR (GVW plus 6,000 lbs.)  
  6 l Vortec 6000 Gas Engine - Less initial cost, 200,000 mile useful life rating, commonality of parts  
  4L80-E A / T - Allows for all skill levels of various operators  
  Anti-Lock Brake System - Four channel anti-lock brake system for controlled braking in emergency situation  
  Electronic Brake Distribution - Electronic brake distribution system uses the anti-lock brakes to sense the amount of load on each wheel and tire through the revolution of the tire. It will adjust the brake pressure to balance braking to all wheels and from front to rear  
  Programmable Engine Control Module (ECM) - Now programmable to provide such functions as idle up for PTO, speed limiting, engine shutdown and many other functions  
Inside Cab
  New large spacious cab with more side to side and front to back space. Increased leg space for rear center crew cab – Allows for more seat travel, extra head and shoulder space and increased leg room  
  85° out swing door opening and wide self cleaning entry step – Allows for easier driver access into and out of the cab  
  New wider step and door opening – Easier entry and egress of the cab  
  Fully trimmed door panels with radio prep and larger map storage pockets. Two door mounted ash trays – Allows for local radio installation without removing door panels. Provides additional storage for maps, clip boards and other papers. Provides easy access to ash tray  
  Power windows and door locks. New power window for rear crew cab door – Easier operation and driver convenience  
  High back seats with back pockets. Tricot breathable cloth seats. New seat belt design with buckle in seat – New design for greater driver comfort, easier seat belt usage, additional storage and seat material stays cooler in the summer and warmer in the winter for additional comfort. 36 mm more seat travel and 4.8° more seat reclining. New seat belt design provides for easier operation  
  Heavy duty floor mat – Protects the floor covering and helps to keep the cab clean  
  Center cup holders – Allow for ease of access to the driver with large volume beverages hold big gulp  
  Center seat  
  Fully trimmed cab interior (single cab only) with over head storage shelves – Provides additional noise insulation, enhances interior cab appearance and provides additional storage  
  Rear coat hook – Provides more storage for the operator’s coat  
  Rear storage organizer – Allows for fire extinguisher and triangle reflector kit mounting with center pocket storage  
  Tilt and telescopic steering column – Allows for easier access and driver comfort  
  Cruise control post mounted – Easier operation and greater driver comfort  
  New modern instrument panel – Low mounted for improved downward visibility  
  Instrument cluster speedometer, tachometer, fuel, water temperature, shift position and warning lamps – Easy to read allows driver to monitor vehicle condition  
  Oil check switch – Allows the driver to easily check the oil level with out tilting the cab  
  Odometer check switch – Allows the driver or operations manager access to mileage information and to check fuel level with key in off position  
  Hi output ventilation system – Allows fresh air in or stale air out  
  5 din opening – Provides space for tow tickets, fuel cards and plastic bag holder for more efficient operation and organized cab  
  Card holder and bag hook – Provides space for tow tickets, fuel cards and plastic bag holder for more efficient operation and organized cab  
  Auxiliary power outlet – 12V power outlet that can be used for such items as radios, cell phone and etc.  
  Dash mounted pull out cup holder – Stores beverages and is easy within reach of driver and passengers  
  Glove box – Additional storage with push open lid to provide out of sight storage  
  Brighter interior dome lamp – Provides for better visibility during night operation  
  Fuse panel – Contains extra spaces for future electrical circuits and houses all the fuses for the vehicle  
  Auxiliary power circuit – Provides additional power source for added optional equipment installation  
  New LED compatible flasher unit – Allows for the installation of LED body lamps for safer operation  
  Electronic idle-up control knob – Allows for faster engine warm up. Aids in the ease of PTO operations  


Hino Trucks Exclusive SiteIsuzu Truck Exclusive Site
Policies | Privacy | Terms | Site Map   ©2013 Dominion Enterprises